Cargo, trailer interchange and general liability are three separate coverages that answer three different claims: cargo pays for the customer’s freight, trailer interchange pays for damage to a trailer you do not own but pull under a written agreement, and general liability pays for injury or damage you cause to others away from driving the truck. Most motor carriers that pull other people’s equipment end up carrying all three next to auto liability, and buying them together is the simplest way to make sure they fit.
This article explains what each one does, why customers ask for the set, and where to look for gaps between them.
What does each of the three coverages pay for?
Each one is built around a different kind of property or a different kind of harm.
Motor truck cargo covers the freight you haul for others. It answers the shipper’s claim when a load is lost, stolen or damaged in your care. The article on what motor truck cargo insurance is explains how a cargo form is built.
Trailer interchange covers physical damage to a trailer, container or chassis you do not own when you have it under a written interchange agreement. It answers the equipment owner’s claim. The longer explanation is in trailer interchange agreements: when you are liable and what pays.
General liability covers bodily injury and property damage to other people that comes from your operations rather than from driving. It answers claims from a dock worker, a visitor to your yard or a customer whose property you damaged on foot. The article on general liability for trucking operations covers it in full.
None of the three covers what the others cover, and none of them replaces auto liability, which answers for the road.
Why do shippers, brokers and equipment providers ask for all three?
Because each of them is protecting something different. A shipper wants to know its freight is covered. An equipment provider wants to know its trailer or container is covered while you have it. A facility owner wants to know that if your driver hurts someone on its property, there is a policy to answer.
Intermodal work makes this explicit. IANA’s UIIA FAQ says motor carriers in the Uniform Intermodal Interchange and Facilities Access Agreement carry auto liability and commercial general liability, and that individual equipment providers may require other insurance, such as cargo and trailer interchange. The FAQ adds that providers may also ask to be named as additional insured on general liability and trailer interchange. That puts all three lines in front of a drayage carrier at once, and it is why drayage carriers usually buy them together. The page for UIIA intermodal trucking insurance covers that class.
Outside intermodal work, the same set shows up in broker carrier packets and in customer contracts, often one line at a time.
Where can motor carriers bundle cargo and liability insurance?
Through an agent that writes trucking programs. Many trucking insurers will write auto liability, cargo, physical damage, general liability and trailer interchange together for a motor carrier that fits their appetite. Others write only some of the lines, and an agent can place the rest elsewhere.
What matters more than the number of insurers is whether someone reads the forms together. Cargo, interchange and general liability each have their own definitions and exclusions, and the boundaries between them are where claims get argued. One agent placing all three can line those boundaries up before a claim tests them.
What does a combined program look like?
Physical damage sits beside these for the equipment you own, and workers’ compensation sits beside them for your own employees. A combined program is simply these lines bought together, each with a limit set by the strictest customer or equipment provider you work with.
What falls between the three policies?
Most gaps come from the same few places.
The first is the trailer itself. Cargo forms usually cover the freight and not the equipment, so damage to a borrowed trailer falls to interchange. If you have no interchange coverage, the trailer owner’s claim may land on you directly.
The second is loading and unloading. Auto liability, general liability and cargo each draw their own line around loading, and the article on loading and unloading insurance coverage shows where those lines can fail to meet.
The third is the yard. A trailer dropped at your lot, or a container staged overnight, raises questions of custody and of which policy is in force, which the article on trailer interchange at a drop yard works through.
The fourth is the freight’s own liability rule. Under 49 U.S.C. 14706, a carrier that issues a receipt or bill of lading is liable for the actual loss or injury to the property. A cargo form with narrow covered causes can leave a carrier owing for freight the policy does not pay for.
Real-World Scenario: Picture a hypothetical drayage carrier picking up a loaded container on a chassis from a rail ramp. On the way out of the terminal the driver clips a light pole, damaging the chassis and denting the container, and a forklift operator nearby is struck by falling debris. The pole is an auto liability claim. The chassis and container are a trailer interchange claim. If the freight inside was damaged, that is cargo. The forklift operator’s injury is argued between auto and general liability. One incident reaches four policies, and the carrier is only fully covered if all four were in place and written to meet.
How do the three show up on a certificate?
Each appears as its own line, and customers read them separately. A broker checks the cargo limit against its requirement. An equipment provider checks that trailer interchange is shown and that it covers what the agreement asks for. A facility checks general liability and whether it is named as an additional insured.
Ask your agent to send certificates that list every line the customer asked for, and keep a copy of what each customer required. Most certificate problems come from a requirement nobody wrote down.
Which carriers need all three, and which can skip one?
Carriers that pull other people’s trailers need all three. That includes drayage, intermodal, many dry van operations pulling customer trailers, and carriers that swap trailers under power-only arrangements. The general freight trucking insurance page covers the most common of those classes.
Carriers that only pull trailers they own, listed on their own physical damage coverage, may not need interchange. They still usually need cargo and general liability, because most customers ask for both.
What about owner-operators leased to a carrier?
The lease decides who carries what. Federal lease rules in 49 CFR 376.12 require the lease to state the authorized carrier’s obligation to maintain public liability coverage and to specify who provides any other insurance. That second part is where cargo, interchange and general liability usually sit, and many leases say less about them than the owner-operator assumes.
Read the insurance section of your lease for each of the three. If the carrier covers cargo while you are under its dispatch, ask whether that cover also reaches a trailer you pick up from one of its customers. If the lease says you must carry your own interchange or general liability, buy it before you take the first load, not after. The article on non-trucking liability and bobtail coverage explains the separate question of the time you are not under dispatch.
How are the limits for each line chosen?
By the strictest requirement you face, one line at a time. A broker sets its own cargo requirement in its carrier packet. An equipment provider sets the interchange requirement in its agreement. A facility or customer contract sets the general liability requirement. Those requirements rarely match each other, and a limit that satisfies one customer can fall short for the next.
We set each limit against the list of requirements the carrier actually has, and against the most valuable trailer or load it regularly handles. Buying the three together makes that easier, because the comparison is done once for the whole program instead of every time a new packet arrives.
What should you do next?
Gather your interchange agreements, your broker carrier packets and your largest customer contracts, and write down every coverage each one asks for. Then start a quote and send them. We will tell you which of the three you need, at what limits, and whether the forms meet where they should.