Box truck with a lift gate beside a brick building — Truck Guard Insurance blog
Coverage Explained

Loading and Unloading Insurance Coverage: Which Policy Pays?

Loading and unloading claims are usually paid by auto liability when the driver is moving freight on or off the truck, by general liability when the injury comes from work away from the truck, and by cargo when the freight itself is damaged. Which one answers depends on the policy wording and the state, and the claims that go badly are the ones that fall between two of the three.

There is no single policy called loading and unloading insurance. It is a boundary that three policies share, and the job is to make sure they meet.

Which policy covers loading and unloading?

Three policies each cover part of it. Auto liability covers injury to other people and damage to their property that arises from using the truck. General liability covers the same kinds of harm when it comes from your operations away from the truck. Motor truck cargo covers the freight.

Before pickup and after delivery
Handling freight away from the truck. Usually a general liability question.
Onto and off the truck
Moving freight between the dock and the trailer. Usually an auto liability question.
The freight itself
Damage to what you are hauling, at any stage the cargo form includes.
Your own driver
An employee hurt at any stage. A workers’ compensation question.
Which policy usually answers at each stage of loading and unloading. The diagram shows structure only and carries no limits or amounts.

The word usually is doing real work in that diagram. Each line is set by the wording of a form, and forms differ.

When does auto liability pay?

When the claim arises from using the truck, and using a truck includes putting freight on it and taking freight off. If your driver is pulling a pallet off the trailer and it falls on a receiver’s employee, that is generally an auto liability claim, even though the truck was parked.

Many auto forms then narrow that in two ways. The first is about time and place: handling the freight before it is moved from where you accepted it, or after it is moved to where you finally delivered it, is commonly outside the auto policy. The second is about equipment: moving freight with a mechanical device that is not attached to the truck, such as a forklift, is commonly excluded, with an exception for a hand truck. Read your own form, because those two sentences decide most dock claims. The Insurance Information Institute’s overview of business vehicle insurance explains the basic auto coverages those exclusions sit inside.

When does general liability pay?

When the claim comes from your operations and not from the truck. General liability forms commonly exclude liability arising from the use of an auto, and many define that use to include loading and unloading. They are written to start where the auto form stops.

In practice general liability picks up what happens before the freight is picked up for loading and after delivery is complete: a pallet your driver restacked inside the customer’s warehouse, freight staged on the dock and left where someone walks, your people working on a customer’s premises. The article on general liability for trucking operations covers the form in full.

The problem is that the two forms are written by different people at different times. If the auto form stops at one point and the general liability form starts at another, the space between them is yours.

When does cargo pay?

When the freight is damaged, and only if the cargo form covers the stage where it happened. This is the question drivers forget, because the first thing anyone thinks about at a dock accident is the person who was hurt.

Some cargo forms cover the freight from the time you accept it until you deliver it. Others cover it while it is on the truck and in transit, and stop there. Some exclude damage from improper loading or from freight that was not secured. The article on what motor truck cargo insurance is explains how to read a form, and the livestock article shows how much loading and unloading exclusions can matter for one class.

Your liability for the freight is separate from your coverage. Under 49 U.S.C. 14706, a carrier that issues a receipt or bill of lading is liable for the actual loss or injury to the property. A cargo form that does not cover unloading does not make that liability go away.

What if the shipper or the receiver loads the truck?

Then two questions come up: who caused the damage, and whether you can prove it. A bill of lading marked to show that the shipper loaded and counted the freight can help in a dispute over a load you could not inspect. It does not end the dispute.

We tell drivers to look at every load they can see before they move it, and to note on the paperwork anything they could not check, such as a sealed trailer. The federal cargo securement rules are in 49 CFR Part 393, Subpart I. A securement problem found at a roadside inspection can be written up against the carrier even when someone else loaded the trailer.

State law also differs on who counts as using a truck while it is being loaded. That is one reason these claims get argued between insurers, and it is a question for your agent and, in a claim, a lawyer.

What if your own driver is hurt?

That is a workers’ compensation claim if the driver is your employee, whoever was at fault. Liability policies cover injury to other people, and they commonly exclude injury to your own employees. Docks are where a lot of driver injuries happen, and OSHA’s page on loading and unloading in the trucking industry covers the hazards.

An owner-operator is not an employee of his or her own business in the same way, and the options are different. The article on workers’ comp for truck drivers explains them.

Real-World Scenario: Picture a hypothetical driver delivering palletized freight to a warehouse. He sets the last pallet on the dock, the receiver signs for it, and he walks back to the cab. Minutes later the pallet tips onto a warehouse worker. The auto insurer says unloading was finished once the freight was set down and signed for. The general liability insurer says the injury arose from unloading the truck, which its form excludes. Both positions can be defended from the wording, and the carrier is left to argue with two insurers while the injured worker’s claim proceeds.

Which operations have the most exposure?

The ones where the driver handles the freight. Box truck and delivery operations load and unload by hand all day, often with a liftgate and often inside the customer’s building. Flatbed drivers work on the deck and around cranes, which is why general liability for flatbed trucking has its own article. A general freight carrier that only backs to a dock has less of it, until the day a receiver asks the driver to help.

How do you close the gap?

Have the three forms read together, by one person, before you buy. Ask where the auto form’s loading and unloading coverage starts and stops. Ask whether the general liability form begins at exactly that point. Ask when the cargo form attaches and when it ends. Then ask what happens when your driver uses a customer’s forklift or pallet jack.

It is easier when one agent places all three, because the wording can be matched at the start. If your policies came from different places, bring all of them.

Check the paperwork your drivers sign as well. Receivers sometimes ask a driver to sign a release before he uses dock equipment or walks onto the warehouse floor, and some customer contracts require the driver to help unload. A release or a contract term can shift responsibility onto you for something your policies were not set up to cover. Have drivers send a photo of anything they are asked to sign, and send your customer contracts to your agent before the first load.

What should you do next?

Write down what your drivers actually do at a dock: whether they touch the freight, whose equipment they use, and how far inside the building they go. Then start a quote and send it with your current policies. We will tell you which policy answers at each step and where none of them does.

The bottom line

Loading and unloading is covered by three policies that each stop at a different point: auto liability for moving freight on and off the truck, general liability for the work around it, and cargo for the freight itself. The gap is at the dock, so have the three forms read together before a claim tests them.

Frequently asked questions

Is loading and unloading covered by commercial auto insurance?

Usually, for the part that counts as using the truck. Auto liability forms generally treat moving freight onto and off the insured vehicle as part of its use. Many forms then carve out handling before the freight is picked up and after it is set down, and carve out moving it with equipment that is not attached to the truck. Read your own form for where it draws those lines.

Does general liability cover unloading at a customer’s dock?

It covers some of it. General liability forms commonly exclude liability arising from the use of an auto, and they often define use to include loading and unloading. What general liability picks up is the work on either side of that: handling freight before it is loaded or after delivery is complete, and your operations on the customer’s premises that do not involve the truck.

Does cargo insurance cover freight dropped during unloading?

It depends on the form. Some cargo forms cover the freight from the time you take it until you deliver it, including loading and unloading. Others cover it only while it is in transit on the truck, or exclude damage caused by improper loading. Ask your agent to show you the sentence that says when coverage starts and stops.

Who is responsible if the shipper loaded the trailer badly?

That gets argued in most claims. A notation on the bill of lading that the shipper loaded and counted the freight can matter in a later dispute, but the carrier is still the one the cargo owner looks to first. We tell drivers to check a load themselves before they move it, and to write down anything they could not inspect.

Am I covered if my driver runs the customer’s forklift?

Ask before it happens. Many auto forms do not cover moving freight with a mechanical device that is not attached to the truck, and general liability forms treat that equipment under their own terms. A driver hurt operating it is a workers’ compensation question. If your drivers run customers’ equipment, tell your agent so it can be addressed on the policy.

What should I ask my agent about loading and unloading?

Ask where the auto form’s loading and unloading coverage begins and ends, whether the general liability form picks up at exactly that point, and when the cargo form attaches and stops. Then ask what happens when your driver uses equipment that is not on the truck. If the three answers leave a space between them, that space is where your claim will land.

About the author

Nate Jones, CPCU

Nate Jones, CPCU, is the founder of Wexford Insurance and Truck Guard Insurance, a specialty insurance agency placing trucking coverage in 48 states across a 16-carrier specialty panel. Nate reads the loading and unloading wording in a carrier’s auto, general liability and cargo forms side by side before the program is bound. Connect via the Truck Guard Insurance quote form or call 317-942-0549.

Get a trucking insurance quote

Send the basics on your authority, equipment, commodity, and lane mix. We pull the panel of specialty trucking markets quoting your class today.