Tractor and trailer on a highway at sunset — Truck Guard Insurance blog
Owner Resources

Interstate Trucking Insurance: What Changes at a State Line

Interstate trucking insurance is the coverage a for-hire carrier needs once its freight moves between states, and the main change is that the federal liability minimum applies in place of the state’s. Whether a load is interstate depends on where the freight starts and where it ends up, not only on whether your truck crosses the line. For a state example, see starting an intrastate trucking company in Ohio.

That second sentence surprises carriers that have always worked in one state, and it is the first thing to settle before you buy a policy.

What makes a load interstate?

The movement of the freight. The federal definitions are in 49 CFR 390.5, which defines interstate commerce and, separately, intrastate commerce. A truck that drives from one state into another is the obvious case. The less obvious one is a truck that stays in one state while hauling the local leg of a shipment that began or will end somewhere else.

Freight picked up at a port or a rail ramp and delivered across town is the example we see most. The truck never leaves the state, and the freight may still be in interstate commerce. If any of your lanes look like that, ask FMCSA or your agent before you assume the state’s rules are the only ones that apply.

Which federal liability minimum applies?

The one in 49 CFR 387.9. Its first row covers for-hire carriage, in interstate or foreign commerce, with a gross vehicle weight rating of 10,001 or more pounds, of nonhazardous property, and sets the minimum at $750,000. The remaining rows are for hazardous materials and oil and are higher, which the page for hazmat trucking insurance covers.

The federal amount is a floor. Brokers and shippers usually ask for more, as the article on liability limits explains, and the limit you buy is normally set by your customers. The weight line in that row is also the subject of the 26,001-pound line article, which covers the lighter trucks that fall under it.

Does the federal minimum apply to smaller trucks?

It depends on the weight rating, and on the freight. The first row of the schedule is written for vehicles with a gross vehicle weight rating of 10,001 or more pounds, so a lighter for-hire truck hauling nonhazardous freight is not in that row. That does not leave it without requirements. The state still has rules, and a broker or shipper will set its own limit before it tenders a load.

This matters most for hot shot and box truck operators, whose equipment can sit on either side of the line depending on the truck and the trailer. Check the rating on the door label, and the rating of the combination if you pull a trailer, before you assume which side you are on. If you haul hazardous materials, different rows apply, so read them with your agent.

What filings come with interstate authority?

Proof that the coverage exists, sent to FMCSA by your insurer. A for-hire carrier with interstate authority has its insurer file a certificate with the agency, and the policy carries a federal endorsement. The article on BMC-91 and MCS-90 explains what each one does, and when the MCS-90 applies explains what the endorsement means in a claim.

The practical point is that not every insurer that writes one-state trucking will make federal filings. If you are moving from one state to interstate work, ask your agent whether your current insurer files, and how long it takes. The insurance is filed before authority issues, as the article on MC numbers, USDOT numbers and the BOC-3 explains.

What if you never leave your state?

Then your state sets the minimum. Trucking that stays inside one state, hauling freight that stays inside it too, works under that state’s financial responsibility rules, and the amounts differ from state to state. Some states also have their own registration or authority for intrastate carriers.

Freight stays inside the state
The state sets the liability minimum. Any registration or authority is the state’s. Confirm with the state agency.
Freight moves between states
The federal schedule sets the liability minimum by commodity. The insurer files proof with FMCSA.
The question that sorts a for-hire load into state or federal rules. The diagram shows structure only and carries no amounts.

Staying in one state does not mean a lower limit in practice. A customer can ask for any limit it likes, and many ask for the federal amount or more whatever the state requires. The state pages on this site cover each state we are licensed in, and you should confirm the current rule with the state agency.

Does crossing a state line change cargo, physical damage or workers’ comp?

It changes each one differently.

For cargo, the change is in your liability. Under 49 U.S.C. 14706, a carrier that issues a receipt or bill of lading is liable for the actual loss or injury to the property. Your motor truck cargo policy changes only if its territory was written for one state.

Physical damage follows the truck, so the question is whether the policy’s territory and radius include where you now drive.

Workers’ compensation is state law, and it is the one carriers miss. A policy lists the states it covers. If your employees start working in a state that is not listed, you may have a gap, and some states do not allow private coverage at all. The article on workers’ compensation for trucking payrolls explains the state-fund states and the interstate rating problem.

How does radius of operation affect the policy?

It is one of the main things the rate is built on. When you apply, you tell the insurer how far you run and in which states, and the policy is priced for that. A truck that works within a short distance of its terminal is a different risk from one that runs several states away.

Trouble starts when the operation changes and the policy does not. If you told the insurer you were a local carrier and a claim happens several states from home, expect questions about what you declared. Tell your agent before the work changes, since a mid-term change is easier to arrange than a disputed claim is to resolve.

Real-World Scenario: Picture a hypothetical carrier that has hauled building materials inside one state for years, insured at that state’s minimum on a policy rated for local work. A good customer asks for a single delivery to a job in the next state, and the owner takes it as a favor. The truck is in a crash on the far side of the line. Now the questions are whether the federal minimum applied to that load, whether the insurer had made any federal filing, and whether the policy’s territory included the state where it happened. None of those questions would have come up on the usual route.

What do brokers and shippers check?

That your authority is active and your insurance is on file, and then your certificate. A broker tendering an interstate load looks up the carrier before it books, and a carrier whose filing has lapsed does not get the load. They also check the limit against their own requirement, which is usually above the federal floor.

A carrier new to interstate work is a new venture to most underwriters, even with years of local experience. The page for new venture trucking insurance explains how that is placed, and the first-year article explains what the first year of authority costs and why.

What should you do before the first out-of-state load?

Do five things in order. Decide whether the freight you haul is interstate, including any in-state legs of longer shipments. Get the authority you need. Ask your insurer to make the federal filing and confirm it has posted. Have your auto liability limit, territory and radius changed to match the new work. Then extend workers’ compensation to every state your employees will work in.

What should you do next?

List the states you run in now and the ones you have been asked to run in. Then start a quote and send that list with your current policy. We will tell you whether the filing, the limit and the territory cover the work you are about to take.

The bottom line

Interstate trucking insurance starts when the freight moves between states, and the main change is that the federal liability minimum and federal filings apply in place of your state’s. Decide which kind of freight you haul before you buy, tell your agent every state you run in, and do not take the first out-of-state load on a policy written for one state.

Frequently asked questions

Do I need interstate insurance if I only cross the state line occasionally?

Yes. The federal liability schedule applies to for-hire carriage in interstate commerce, and a single load across the line is interstate carriage. Tell your agent before you take it, because a policy written and rated for one state may not be filed, limited or rated for that trip.

Is a load interstate if my truck never leaves the state?

It can be. Whether a load is interstate depends on where the freight starts and where it ends up, so the in-state leg of a shipment that began or will end in another state can be interstate commerce. Freight moving to or from a port or a rail ramp is the common example. Check 49 CFR 390.5 and ask FMCSA or your agent when a lane is unclear.

Does the federal minimum apply to trucking that stays in one state?

The federal schedule is written for interstate and foreign commerce. Trucking that stays inside one state looks to that state’s rules for its minimum, and states differ. Some customers will ask for the federal amount or more whatever the state requires. Confirm the state rule with the state agency, as this article does not restate state law.

What is the difference between interstate and intrastate authority?

Interstate for-hire authority comes from FMCSA, and it carries federal insurance filings. Intrastate authority, where a state requires it, comes from that state. Many carriers hold both. The article on MC numbers, USDOT numbers and the BOC-3 on this site explains the federal side, and your state’s transportation agency explains the other.

Does my cargo insurance change when I cross a state line?

Your liability for the freight does. Federal law at 49 U.S.C. 14706 makes a carrier that issues a receipt or bill of lading liable for the actual loss or injury to the property. Your cargo policy changes only if its territory or radius was written for one state, so check that the form covers the states you now run in.

How do I add states to my trucking policy?

Call your agent before the load, not after. The insurer needs to know the states and the distance you will run, since both affect the rate, and it may need to make a federal filing if you are getting interstate authority. Workers’ compensation has to be extended to the new states as well if you have employees working there.

About the author

Nate Jones, CPCU

Nate Jones, CPCU, is the founder of Wexford Insurance and Truck Guard Insurance, a specialty insurance agency placing trucking coverage in 48 states across a 16-carrier specialty panel. Nate places carriers moving from one-state work to interstate authority and checks the filing, the limit and the radius before the first load crosses. Connect via the Truck Guard Insurance quote form or call 317-942-0549.

Get a trucking insurance quote

Send the basics on your authority, equipment, commodity, and lane mix. We pull the panel of specialty trucking markets quoting your class today.